Key Architecture Highlights
- Supported processors: It supports Intel Xeon processor platform.
- Installation form factor: −1P 1U rack .
- Chassis and drive bay options: −4 SFF with options supporting: +2 SFF. −2 LFF Hot Plug . −2 LFF Non - Hot Plug .
Applications
- Enterprise computing
- Virtualization and cloud computing
- Data center
Engineering Parameters
| Supported processors | It supports Intel Xeon processor platform. |
|---|---|
| Installation form factor | −1P 1U rack . |
| Chassis and drive bay options | −4 SFF with options supporting: +2 SFF. −2 LFF Hot Plug . −2 LFF Non - Hot Plug . |
| Cooling fans | − Includes 3 performance single rotor non- hot plug and non - redundant fans . Notes: This applies for all three chassis: 2 LFF NHP, 2 LFF HP and 4 SFF HP . |
| Chipset | Intel® C26 2 Chipset Notes: For more information regarding Intel® chipsets, refer to the following URL: https://www.intel.com/products/server/chipsets/ . On System Management Chipset HPE iLO 6 ASIC Notes: Read and learn more in the iLO QuickSpecs . |
| Network interfaces | Embedded Broadcom BCM57 19 Ethernet 1Gb 4- port BASE - T Adapter . The HPE ProLiant DL20 Gen11 offers the customer a quad - port NIC standard with the option to upgrade with a variety of networking options. Notes: − Support document and downloads including firmware and drivers for the Broadcom BCM5719 Ethernet 1Gb 4- port BASE-T LOM Adapter can be downloaded from the supplier’s support and services webpage . − ProLiant DL20 Gen11 system do es not support Networking SR- IOV. − Port 1 is used as shared port for iLO and production data. |
| PCIe Expansion | # Technology Bus Width Connector Width Processor Slot Form Factor 1 PCIe 5.0 x16 x16 CPU 1 Full height half length 2 External OCP 3.0 x4 x4 PCH OCP 3.0 3 Internal OROC 3.0 (Internal OCP) x4 x4 PCH OROC Notes: − Bus Width indicates the number of physical electrical lanes running to the connector. − External OCP 3.0 is for networking (NIC) controller OCP form factor options. − Internal OROC is for storage controller OCP form factor options. − Internal OROC and External OCP 3.0 options can be selected together. |
| Power supply support | − HPE 290W Non - redundant FIO Power Supplies . • P21649 - B21 , HPE DL20 Gen10 Plat 290W FIO Power Supply Kit . • P45476- B21 , HPE ProLiant DL20 Gen10 Plus290W FIO Power Supply Kit . Notes: − Both 290W Power Supplies support both Pre- Configured Models and Configured Factory Integrated Models − P21649 - B21, Power efficiency at 92% single output . − P65409 -B21, HPE DL20 Gen11 ATX PSU FIO Enable Kit required and must be added when using ATX power supplies . |
Warranty
This product is covered by a global limited warranty and supported by HPE Services and a worldwide network of Hewlett Packard Enterprise Authorized Channel Partners resellers. Hardware diagnostic support and repair is available for three years from date of purchase. Support for software and initial setup is available for 90 days from date of purchase.
Manufacturer information
Manufacturer informationVerified Documentation & Datasheets
Manufacturer product information
Download Document